CSM 100g E Glass Powder Emulsion Fiberglass Chopped Strand Mat
Fiberglass chopped strand mat(referred to as csm) is glass fiber
filament cut into a 50mm length, randomly but equally distributed
on the mesh belt. Then spread power or emulsion binder by heating
after curing bonding into chopped strand mat.
Non-woven fiberglass chopped strand mat is easily wet out by resin, easy-processed, good wet strength retention, excellent laminate, transpartent clear color.
This CSM is widely used hand lay-up FRP like various sheets and
panels, boat hulls, bath tubs, cooling towers, vehicles,
automobile, chemical, electrical industries etc.
- No spots and debris, smooth edges
- Coating and defoaming application
- Quick permeation, less strength loss.under moisture conditions
- Easily wet-out, Easy to form, roll-out and air release
- Low fuzz, even and equal thickness
- Water resistant, anti chemical agents, anti-corrosion
- High strength, suitable for filament winding or continuous
- Transparency color
Data Sheet Of CSM100:
|Mass Per Unit Area|
|Roll Weight||35kg/roll, customized|
|Capacity Of 20FT Container||10 Tons|
Chopped strand mat is very economical and offers good strength.
However, for greater strength
and a lower weight product biaxials and woven cloth fabrics are
All the chopped strand mats are compatible for use with polyester resins and vinyl ester resin.
Useful Tips For CSM
The individual glass fibers that make up chopped strand mat is held
together by an adhesive binder(powder/emulsion) that is designed to
be wet out polyester and vinyl ester resins.
How Much Resin Do I Need?
Fiber glass chopped strand mat requires approximately 1.5 to 2
times of mat weight in resin for complete saturation (For example:
1LB mat needs 1.5 to 2 LBS of resin). And most resins is approximate 9.5 LBS per gallon.
Weight: 100g/m2, 300g/m2, 450g/m2, 600g/m2, 900g/m2
Width: 1040mm-3200mm, 1040mm is common
Common Roll Weight: 35kg
Mass Per Unit